Blackstar Dept 10 Amped 2

Reward Points Earn 539 points for this item
Applies only to registered customers.
Estimate Shipping
Part Number

AMPED 2 is a 100 Watt pedal power amplifier with drive pedals in the front end, and an advanced effects processor capable of delivering the tone and feel of a traditional valve amp.

You can use it to power a cabinet, go direct or connect to the front end of a traditional amp, ensuring you can take your sound with you anywhere.

Power reduction down to 1W and USB-C connectivity means it’s equally at home in the studio or the stage.


The tone journey starts in the AMPLIFIER section where you set your amp type from either USA, UK or CLASSIC.

Using the DRIVE options you can stack a BOOST, DRIVE or FUZZ on top to take your break up to the next level whatever tone you’re looking for!

You then essentially have tweakable MOD, DELAY and REVERB stompboxes built in to make this the ultimate all-in-one stage ready pedal.


As with St James, and Dept 10 valve pedals you get the full CabRig software, which is our next-generation DSP speaker simulator that reproduces the sound and feel of a mic’d up guitar cab in incredible detail.

Deep-dive using the accompanying free Architect software and capture the incredible tones via USB / XLR out.

100W 2 channel pedal power amp.
Performance ready amp with multi effects.
Unique high-headroom design that automatically matches to the speaker impedance to deliver maximum power and optimum tone with any 8 or 16 Ohm cabinet set-up.
Response control delivers three distinctly different and authentic power valve responses - EL34, 6L6 and EL84. Each setting delivers the response, dynamics, sag and break-up characteristics of the selected valve power amp.
Choose from USA, UK and Classic Amp voicings to dial in your perfect tone.
3 drive voices – Boost, Drive and Fuzz.
Effects include Modulation, Delay and Reverb.
Pro connectivity and integration into your setup using low latency USB audio as an interface for recording, TRS stereo line out and XLR Mono D.I. for live use.
Effects loop, 2 x 9V DC outputs and MIDI control for easy integration into your pedalboard or rig.
On board Chromatic Tuner allowing for tuning on the fly during live performances.

Power  100W
Effects Drive, Mod, Delay, Reverb
Channel Voices USA, UK, Classic
EQ Bass, Middle, Treble
Power Reduction 100W, 20W, 1W
Response 6L6, EL34, EL84
Drive Y
Modulation Y
Delay Y
Reverb Y
Modulation Freeze effect Y
Delay Freeze effect Y
Reverb Freeze effect Y
Cab Rig DSP Y
USB Audio Y
XLR Cab Rig Output Y
Effects Loop Y (series or parallel selectable in Architect)
MIDI Control Y
Speaker Outputs 8 Ohm, 16 Ohm
9V DC Output 2 (maximum combined current 500mA)
Voltage 100V to 240V ~ 50/60Hz
Dimensions (mm) W 288mm x D 149mm x H 80mm
Weight (Kg) 1.98
Channel Voicing USA, UK, Classic
Drive Boost, Drive, Fuzz
Modulation Chorus/Flanger, Tremolo/Harmonic Tremolo, Phaser
Delay Linear, Analogue, Shimmer
Reverb Room, Spring, Plate
Channels AMPED 2
USA Inspired by classic American amps of the mid ’60s. Very clean, dynamic and bright, but with a solid low-end and controlled mids. A perfect pedal platform.
UK A distinctive preamp based on a much-loved British Class A amplifier of the early ’60s. A low to medium gain preamp that can be used clean, warm or mildly overdriven. Popular choice for a ‘pedal platform’ or as a responsive crunch tone.
Classic Based on Blackstar’s award-winning cascaded valve/tube overdrive circuits and a traditional ‘British style passive tone stack’. Perfect for big chords and crunchy rhythm playing with clear note separation Response
Classic British Class A/B crunch full-bodied soft break-up.
Bell-like full-bodied Class A with lots of compression.
Tight dynamic Class A/B with extended highs and lows.

More Information
EAN 845644006861
UPC 845644006861
Manufacturer Blackstar
Condition New
Write Your Own Review
You're reviewing:Blackstar Dept 10 Amped 2